FITTINGS

RADIX offers an extensive range of standard and bespoke fittings to meet your project requirements. Through collaboration, we will turn your ideas into reality with careful and practical design, and using our state-of-the-art laser cutting technology to produce any pattern you require.

Our full catalogue is available on request.

FITTINGS

RADIX offers an extensive range of standard and bespoke fittings to meet your project requirements. Through collaboration, we will turn your ideas into reality with careful and practical design, and using our state-of-the-art laser cutting technology to produce any pattern you require.

Our full catalogue is available on request.

UNIVERSAL HOLDING DOWN FITTINGS

Simple and effective, our range of brackets are available in various sizes and grades of material. Commonly used for holding timber or steel sections in place they can be fixed to our ground screw flanges through the slotted hole, providing adjustment where required.

HDB 18S 80×60-T5.0

Fitting Type Universal Angle Holding Down Bracket (1101)
Weight 0.18kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Sections
Fixings M12, M6
Download Data Sheet

HDB 18S 100×80-T5.0

Fitting Type Universal Angle Holding Down Bracket (1102)
Weight 0.42kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Sections
Fixings M16, M8
Download Data Sheet

HDB 18S 110×95-T8.0

Fitting Type Universal Angle Holding Down Bracket (1106) + Spacer Plate (1107)
Weight 2 Parts, 1.1kg / 0.7kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Sections
Fixings M16, M8
Download Data Sheet

U-PROFILE FITTINGS

Our U-Profile fittings are a great choice for locating timber joists or fixings fence posts and stanchions. Manufactured in a wide variety of sizes we have something to fit all sections. Our team will visualise and engineer your ideas to any specification and ensure it meets design integrity.

UPB 18S 100x110X100-T5.0

Fitting Type U-Profile Bracket (1201)
Weight 0.7kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber Joists
Fixings M16, M10
Download Data Sheet

UPB 18S 133x116x133-T8.0

Fitting Type U-Profile Bracket (1204)
Weight 1.75kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Posts
Fixings M16, M8
Download Data Sheet

UPB 18S 180x163x180-T8.0

Fitting Type U-Profile Bracket (1206)
Weight 2.6kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Posts
Fixings M16, M10
Download Data Sheet

SIDE PALM FITTINGS

Designed specifically for a few clients our side palm fittings are an excellent choice for fixing timber base frames used in the lightweight timber frame industry. The profile of the bracket provides rigidity and excellent lateral adjustment via the bottom slotted hole fixing to the central captive nut in the ground screw flange.

SPB 18S 135-T5.0

Fitting Type U-Profile Side Palm Bracket (1301)
Weight 1.66kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Frames
Fixings M16, M8
Download Data Sheet

SPB 18S 180-T5.0

Fitting Type U-Profile Side Palm Bracket (1302)
Weight 1.94kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Fixing Timber / Steel Frames
Fixings M16, M8
Download Data Sheet

LEVELLING ADAPTER FITTINGS

Our level adapter fittings are designed for use with our 140mm & 200mm diameter flange ground screws. These offer both height and level adjustment using off the shelf M10 set screws, great when a little bit of flexibility is required, or can be used just to increase the landing area on top of the flange.

LAP 18S SQ 150×150-T6.0

Fitting Type Level Adapter Plate (1402)
Weight 0.9kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application RF200 Level & Height Adjustment
Fixings M16, M10 C/S
Download Data Sheet

LAP 11.5H SQ 300×300-T6.0

Fitting Type Level Adapter Plate (1405)
Weight 4.2kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application RF200 Level & Spreader Plate
Fixings M10 C/S
Download Data Sheet

LAP 17.5H RF 220DIA-T8.0

Fitting Type Level Adapter Plate (1407)
Weight 2.11kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application RF140 Adapter
Fixings M16 C/S, M12
Download Data Sheet

HEIGHT ADJUSTABLE FITTINGS

Utilising the central captive fixing point on the ground screw flange our height adjustable fittings come in a range of sizes and provide varying degrees of adjustment and load bearing capacity. A great option when fine adjustment is required over larger areas.

HAB M16 150DIA-T6.0

Fitting Type Height Adjustable Bracket (1501)
Weight 0.97kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Height Adjustment / Lightweight Structures
Fixings M16 Thread
Download Data Sheet

HAB M24 200DIA-T12.0

Fitting Type Height Adjustable Bracket (1502)
Weight 5.3kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Height Adjustment / Heavyweight Structures
Fixings M24 Thread
Download Data Sheet

SPECIAL APPLICATION FITTINGS

Offering a complete bespoke design and build solution to meet project requirements. Our draughting and design team will support detailed drawings, visualisation and full design of individual fittings where required. Manufactured under EN ISO 9001:2015 quality management and finished in accordance with EN ISO 1461:2009 you can be confident to receive best in class products.

V 75×500 TYPE 1

Fitting Type Special Applications: Flange Extension (1701)
Weight 7.2kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Extension Multi Purpose
Fixings M12
Download Data Sheet

V SCE TYPE 1 220DIA-140DIA

Fitting Type Special Applications: Stub Column Extension (1702)
Weight Variable
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Extension Multi Purpose
Fixings M12, M16
Download Data Sheet

V LSB TYPE 1 203x133x30UB

Fitting Type Special Applications: Load Spreader Beam (1703)
Weight 30.0kg
Material Mild Steel (S275)
Surface Hot-dip galvanised Steel, according to DIN EN ISO 1461
Application Load Distribution
Fixings M10, M12
Download Data Sheet